Engineering Center

Application: High-efficiency hobbing for spur and helical gears, rough and finish machining.

Precision: Hobbing accuracy up to Grade 6~7, surface roughness Ra≤3.2μm.

Range: M0.5~M12, max diameter Φ500mm.

Application: Internal gears, double/triple gears, shoulder gears not suitable for hobbing.

Precision: Shaping accuracy up to Grade 6~7.

Range: M0.5~M10, max diameter Φ400mm.

Application: High-precision turning and milling for gear blanks, shafts and disc parts.

Precision: Turning accuracy 0.005mm; surface roughness Ra≤1.6μm.

Range: Max turning diameter Φ500mm; max length 1000mm.

Application: Precision tooth surface finishing, improves profile accuracy and surface finish.

Precision: Grinding up to DIN 3 (GB 3), Ra≤0.4μm.

Range: M1~M16, max diameter Φ800mm.

Application: Gear tooth surface finishing, improves surface finish and profile accuracy.

Precision: Shaving accuracy up to Grade 5~6.

Range: M1~M8, max diameter Φ320mm.

Application: Precision machining of slender shafts, small module gears and micro parts.

Precision: Surface roughness Ra≤0.8μm.

Range: Precision shafts, small parts, micro gear shafts.

Application: High-efficiency gear finishing, single-pass broaching for internal gear/spline bore.

Precision: Internal spline H6~H7 grade.

Range: Internal gears/splines, rated pull 100~400kN.

Application: Precision drilling, tapping, milling and auxiliary operations.

Precision: Positioning accuracy ±0.005mm.

Range: Working area 600×400×300mm.

Application: Comprehensive gear parameter measurement: profile, helix, pitch, runout.

Precision: Measurement accuracy 0.001mm, meets DIN/ISO/AGMA standards.

Range: Max gear diameter Φ600mm, module M0.5~M20.

Application: Three-dimensional precision measurement of complex geometric features.

Precision: Measurement accuracy 0.002mm.

Range: Measuring range 800×1000×600mm.

Application: Non-contact measurement for small gear geometry and micro features.

Precision: Measurement accuracy 0.003mm.

Range: Magnification 20-120x, max measuring range 200×100mm.

Application: Surface and core hardness testing after heat treatment.

Precision: Rockwell, Vickers and Brinell scales available.

Range: HRC 20~65, HV 200~900.

Application: Surface finish measurement of tooth flanks and bearing surfaces.

Precision: Measurement accuracy ±5%.

Range: Ra 0.01~10μm.

Application: Internal defect detection for gear blanks and shafts.

Precision: Detection sensitivity equivalent to Φ2mm flat-bottom hole.

Range: Thickness range 0~1000mm.